Switches & Push Buttons

- Switches three 120V AC sources - Red reverse polarity LED indicators - Green power available LED indicators

- 10A continuous - Single Pole Double Throw or Single Pole Single Throw - Can be wired for normally open or normally closed - Available in Blue & Red - Available in momentary and non-momentary - Installs with .110inch quick connects (included in retail package)

- 10A continuous - Single Pole Double Throw or Single Pole Single Throw - Can be wired for normally open or normally closed - Available in Blue & Red - Available in momentary and non-momentary - Installs with .110inch quick connects (included in retail package)

- Switches two 120V AC sources - Red reverse polarity LED indicators - Green power available LED indicators

- Switches two 120V AC sources - Red reverse polarity LED indicators - Green power available LED indicators

- 10A continuous - Single Pole Double Throw or Single Pole Single Throw - Can be wired for normally open or normally closed - Available in Blue & Red - Available in momentary and non-momentary - Installs with .110inch quick connects (included in retail package)

- 10A continuous - Single Pole Double Throw or Single Pole Single Throw - Can be wired for normally open or normally closed - Available in Blue & Red - Available in momentary and non-momentary - Installs with .110inch quick connects (included in retail package)

- Backlit button is blue when OFF and red when ON - Five ICON labels included: Accessory, Lights, Anchor Light, Running Light, and Bilge Pump - Additional 50 ICON label kit sold separately

- Backlit button is blue when OFF and red when ON - Five ICON labels included: Accessory, Lights, Anchor Light, Running Light, and Bilge Pump - Additional 50 ICON label kit sold separately

Digitally controls dimming of non-regulated LED, incandescent, and halogen lights - Illuminated exit with adjustable time delay - Digitally controls dimming of non-regulated LEDs, incandescent, and halogen lights - Memory for last setting - Provides continuous voltage control from 0 to 100% of input voltage - Offset mounting tabs allow dimmers to be mounted close together - Retail package includes momentary (ON)-OFF-(ON) switch

Digitally controls dimming of non-regulated LED, incandescent, and halogen lights - Illuminated exit with adjustable time delay - Digitally controls dimming of non-regulated LEDs, incandescent, and halogen lights - Memory for last setting - Provides continuous voltage control from 0 to 100% of input voltage - Offset mounting tabs allow dimmers to be mounted close together - Retail package includes momentary (ON)-OFF-(ON) switch

Digitally controls dimming of non-regulated LED, incandescent, and halogen lights - Illuminated exit with adjustable time delay - Digitally controls dimming of non-regulated LEDs, incandescent, and halogen lights - Memory for last setting - Provides continuous voltage control from 0 to 100% of input voltage - Offset mounting tabs allow dimmers to be mounted close together - Retail package includes momentary (ON)-OFF-(ON) switch

Digitally controls dimming of non-regulated LED, incandescent, and halogen lights - Illuminated exit with adjustable time delay - Digitally controls dimming of non-regulated LEDs, incandescent, and halogen lights - Memory for last setting - Provides continuous voltage control from 0 to 100% of input voltage - Offset mounting tabs allow dimmers to be mounted close together - Retail package includes momentary (ON)-OFF-(ON) switch

Digitally controls dimming of non-regulated LED, incandescent, and halogen lights - Illuminated exit with adjustable time delay - Digitally controls dimming of non-regulated LEDs, incandescent, and halogen lights - Memory for last setting - Provides continuous voltage control from 0 to 100% of input voltage - Offset mounting tabs allow dimmers to be mounted close together - Retail package includes momentary (ON)-OFF-(ON) switch

This product includes 1 models. Click on the following model buttons to read the features.

Latch: 38 x 20 mm Escutcheon: 40 x 20 mm

- Provides electrical insulation for exposed panel backs - Provides mechanical protection for panel backs protruding into lockers - Lightweight material is easily drilled for wire entrance and exit - Meets ABYC requirements for panels with combined AC and DC - Used on Blue Sea Systems toggle style circuit breaker panels only

- Provides electrical insulation for exposed panel backs - Provides mechanical protection for panel backs protruding into lockers - Lightweight material is easily drilled for wire entrance and exit - Meets ABYC requirements for panels with combined AC and DC

- Switches 2 - 120 or 230 Volt AC sources - Compact solution when circuit protection is provided elsewhere - Allows connecting one of two different AC sources to one circuit - Mounts in panels up to 0.16" (4.00mm) thick - Heavy duty industrial rated switch - Intuitive function - One hand operation - UL listed

- Switches between 2 - 120 Volt AC shore power sources and 1 - 240 Volt AC source to 2 - 120V AC load groups - Switches both lines (hot) and neutral - Compact solution when circuit protection is provided elsewhere - Allows connecting one of two different AC sources to one circuit - Mounts in panels up to 0.16" (4.00mm) thick - Heavy duty industrial rated switch - Intuitive function - One hand operation - UL listed

- Switches 2 - 120 or 230 Volt AC sources - Compact solution when circuit protection is provided elsewhere - Allows connecting one of two different AC sources to one circuit - Mounts in panels up to 0.16" (4.00mm) thick - Heavy duty industrial rated switch - Intuitive function - One hand operation - UL listed

- Switches 2 - 120/240 Volt AC sources - Compact solution when circuit protection is provided elsewhere - Allows connecting one of two different AC sources to one circuit - Mounts in panels up to 0.16" (4.00mm) thick - Heavy duty industrial rated switch - Intuitive function - One hand operation - UL listed

- Switches 2 - 230 Volt AC sources - Includes 9011 heavy duty industrial rated switch - Two-part polyurethane slate gray finish - Heavy 1/8" aluminum 5052 alloy - Red reverse polarity LED indicators - Green power available LED indicators - Compact solution when circuit protection is provided elsewhere - Allows connecting one of two or three different AC sources to one circuit

- Switches 2 - 230 Volt AC sources - Includes 9011 heavy duty industrial rated switch - Two-part polyurethane slate gray finish - Heavy 1/8" aluminum 5052 alloy - Red reverse polarity LED indicators - Green power available LED indicators - Compact solution when circuit protection is provided elsewhere - Allows connecting one of two or three different AC sources to one circuit

- Switches 2 - 120 Volt AC sources - Includes 9011 heavy duty industrial rated switch - Two-part polyurethane slate gray finish - Heavy 1/8" aluminum 5052 alloy - Red reverse polarity LED indicators - Green power available LED indicators - Switches AC sources - Compact solution when circuit protection is provided elsewhere - Allows connecting one of two or three different AC sources to one circuit - Includes heavy duty industrial-rated switch - Red reverse polarity LED indicators - Green power-available LED indicators

- Switches 2 - 230 Volt AC sources - Includes 9011 heavy duty industrial rated switch - Two-part polyurethane slate gray finish - Heavy 1/8" aluminum 5052 alloy - Red reverse polarity LED indicators - Green power available LED indicators - Compact solution when circuit protection is provided elsewhere - Allows connecting one of two or three different AC sources to one circuit

- Switches 2 - 120/240 Volt AC sources - Two-part polyurethane slate gray finish - Heavy 1/8" aluminum 5052 alloy - Red reverse polarity LED indicators - Green power available LED indicators - Compact solution when circuit protection is provided elsewhere - Allows connecting one of two or three different AC sources to one circuit

- Mounts on any Blue Sea Systems" Contura Switch - Constructed of thermal plastic polycarbonate with a hard nylon surface overlay - For each embedded LED there is a corresponding number of lenses

- All positive, negative and grounding buses installed, fully pre-wired - Panels with meters include toggle switch for mounting up to 3 battery banks - All panels with analog meters are owner upgradable to 24 Volts with 8240 or 8243 (18-32V DC meters) - All circuit label positions are backlit on standard panels - No kit required - "ON" indicating LEDs installed in all circuit positions

Insulated single stainless steel stud terminates multiple large conductors - Connects high amperage cables securely - Stud dimensions: #10-32 x 5/8" - Base Material is PBT UL94 V0